Image: 

Includes: S24Q, S24Q/2, S24Q-GOLD, S24Q-GOLD/2, SUV 24P-100, and PVC units

Image: 

Includes: S5Q-PA, S5Q-PA/2, SSM-24, SSM-24/2, S5Q, S5Q/2, S5Q-GOLD, S5Q-GOLD/2

Laboratory-grade performance, in the field

The 2100P Portable Turbidimeter combines microprocessor- controlled operation and Hach's patented Ratio™ optics to bring greater accuracy, sensitivity and reliability to field testing. The two-detector optical system compensates for color in the sample, light fluctuation and stray light, allowing analysts to achieve laboratory-grade performance on a wide range of samples, under a wide range of conditions.

• Lab Quality Results in a Portable Unit
• Range: 0 to 1000 NTU
Manufacturer: 
Hach
$1,695.00

The Pocket Colorimeter II Analysis System measures both free and total chlorine, at a range of 0.02 to 2.00 mg/L and 0.01 to 8.0 mg/L. Perfect for regulated sites that don't have online/constant monitoring equipment, the colorimeter allows fast, accurate analysis that meets regulatory requirements.

Includes reagent set (100 tests each, low range, or 50 tests each, high range), manual, and carrying case. USEPA approved/accepted for drinking water.

The Lead in Water test is a revolutionary product designed to make testing for Lead safe, easy, and affordable. This patent pending device utilizes a lateral flow test strip, similar in technology to home pregnancy and ovulation tests. With accurate, reliable results being achieved in just 10 minutes, the Lead In Water test clearly gives results conforming to the USEPA guideline of 15 parts-per-billion.

Patented technology allows for a detection sensitivity of 0.1 PPM (0.1 mg/L) on the Iron Check test strip. This test promises to be an attractive alternative to wet chemical iron tests for several reasons: There are no hazardous chemicals to mix (an MSDS is not required); Quick results are obtained in minutes; And, best of all, the Total Iron Test Strips are safe and easy to use for fast accurate results within the ranges of 0.1 to 5 PPM, which permits the measurement of typical iron levels found in well, tap, and stream water.

If high range detection of Fe+2 is what you need, this is the answer. Ida's Iron Check HR is designed to specifically react with Iron, without interference from other heavy metals that may be present. Say goodbye to dangerous, time-consuming wet-chemical kits that require extensive training and cost. This patented test is a simple dip-and-read test procedure that requires no technical training. Additionally, since there is no glass required to run the test, and since the chemical concentration is extremely low, the test is ideal for use in controlled areas.

If low range detection of Fe+2 is what you need, this is the answer. Ida's Iron Check is designed to specifically react with Iron, without interference from other heavy metals that may be present. Say goodbye to dangerous, time-consuming wet-chemical kits that require extensive training and cost. This patented test is a simple dip-and-read test procedure that requires no technical training. Additionally, since there is no glass required to run the test, and since the chemical concentration is extremely low, the test is ideal for use in controlled areas.

These Total Chlorine test strips combine a high range of detection with our patented indicator. Designed to resist interference from monochloramines, Sensafe High Range Total Chlorine is the ideal product when testing in a medical environment. Sensafe High Range Total Chlorine is perfect for determining whether or not you have the correct amount of sanitizer present. Sold in bottles of 50 test strips, all of the reagents are impregnated on the test strip pad, and no external chemicals are needed to perform the test.

A single test strip has been designed with two separate test pads: one for pH and the other for Total Alkalinity measurements. This test is an alternative to wet chemical tests since it gives reproducible results for each test separately. Test range is from 6.0 to 9.0 for pH and 0-360 ppm for total alkalinity.